Closed beta · Rhino 8
Sphericon Mobilier for Rhino 8
A set of tools for furniture design in Rhino 8. You place the hardware in one click, and the holes, parts list, part sheets and nesting come from the same model.
The position of every hole is decided in the drawing
A hinge hole in the wrong place means a door made again. I built a set of tools in Rhino 8 for this, and I use it on my own projects.
The Rhino interface shown in the clip is in Romanian.
Tools
What it does
Hardware in one click
Hinges, Confirmat screws, drawer runners and handles. You place them on the model and their holes come with them.
Parts list, checked
The bill of materials (BOM) comes from the model: panels, edge banding, hardware. The project check looks for doors with no clearance, parts that intersect and parts with no hardware.
Part sheets
Part sheets are generated from the same model. You do not draw them separately.
Sheet nesting
Parts are laid out on the sheet format.
Edge banding
Edge banding is applied on the model, on the edges you choose.
One model
Everything starts from the 3D model you draw anyway.
Buttons
The toolbar buttons
The toolbar has two tabs. Below are the buttons and what each one does.
Sph Feronerie
- HingesFitted on doors: overlay, half overlay, inset, wide angle. Cross or in-line mounting plate.
- DoorsCreates the fronts in the space you mark, one or two doors, with a 1.5 mm gap. Then fits the hinges.
- Drawer runnersFits drawer runners, for several systems.
- Confirmat screws7×50, 6.3×50, 7×70 or 7×50 with an 8×30 dowel.
- Knock-down fittingsKnock-down connectors for carcasses and for shelves.
- HandlesGOLA / J profiles, knobs and handles on the front, with the recess milled into the parts.
- Lift-up doorsLift-up door mechanisms, in several variants.
- Cabinet hangerFor wall cabinets: holes in the sides and a cut-out in the back panel.
- Worktop connectorFor HPL worktops up to 12 mm: milling on the underside of the worktop.
- LegsInserts legs under the carcass.
Sph Constructiv
- Edge bandingYou choose the edge band type, click the part, then the edges.
- Edge banding checkAll edge bands in the project, coloured by type. Parts with no edge band show in red.
- GroovesA groove on the face or in the edge: rectangular, tapered, dovetail. Also bevelled edges.
- Stretch carcassYou change one dimension of the carcass in a chosen zone. The holes stay untouched.
- Group with hardwareYou pick the panels and their hardware joins the same group automatically.
- Parts tableAll parts: item, name, carcass, dimensions, edge banding per side. Click a row and the part is highlighted in the model.
- Part sheetsA production drawing per part, on A3: edge banding on the outline, holes, table, title block.
- Assembly drawingOn A3: exterior / interior views, item numbers, parts table, assembly dimensions.
- Sheet nestingLays the parts out on sheets by their real shape, with holes and milling.
Users
Who it is for
Furniture designers who work in Rhino 8. If you work in another program today, tell me which one in the form. It helps me to know.
Beta
How the beta works
The beta is free and closed: 5–10 places.
-
01
You sign up
You fill in the form below. I reply by email.
-
02
You get the plugin
I send you the package and the installation steps.
-
03
You try it for 14 days
The trial period is 14 days. You use it on a project of your own.
-
04
You tell me what you saw
In return, I ask for a 15-minute conversation: what worked, what got in your way, what is missing.
Form — beta sign-up
Tell me briefly how you work
Questions